 |
1 left, then they won't be carried anymore.
BUSINESS
CARD
HOLDER
Gold Plated. Overall size 3.75"w x 2.25"h x 3/16"d. Slightly recessed area for beads is 3 3/8"w x 1 3/4" h. No assembly required.
Order BCH - Business Card Holder |
||
| .
|
by Paypal
pay from your Paypal account balance, or paypal attached:  |
If you don't have a Paypal account, use this column to shop.  |
Qty 1 $ 6.00 |
||
| Printable MAIL ORDER Form .pdf |
Paypal - | View Non-paypal cart |
Gallery All instructions, Blank Graphs, and available color graphs are printable on-line, below. They will not be included with your order unless you request it. You must say so on your order. If it's clickable, the pattern is free and instantly downloadable. If it's not clickable, then the pattern is not available through this site. Try contacting the artist. You need to have the Adobe Acrobat Reader Version 6.0 or higher version to view and/or print out any available graphs/patterns which are in *.pdf format (stands for Portable Data File). IT IS FREE! Click here to get it straight from Adobe.
|
||
| General
Instructions for all Projects using Seed / Delica beads(html format)
Glueing items onto this project: For buttons I use 2 part clear 60 second epoxy in the syringes. You can get this at hardware or automotive parts stores. For flat back Swarovski's, I use Beacon brand Gem Tac, available at most any craft store. Use a toothpick to apply little dots of GemTac, about 3 at a time. Let them sit a minute so the glue will get tacky, then put the stones on the glue dots. This way, the stone is much less likely to 'swim' around on the glue, and stay exactly where you put it down. For applying beadweaving: I usually cut out a piece of gold card stock, or gold poster board. I can get this at Michael's craft store, Hobby Lobby, or JoAnn's. I buy matte gold, rather than shiny gold - just a personal preference. Then I paint the sides of the card stock with gold acrylic paint, because the gold color is only on top, not all the way through the card stock or poster board. I apply an approximately 1/64" layer of epoxy on the card stock, and place the beadwork on it. It's just enough glue so that it goes up between the beads a little bit, but not enough to come through the beads where you can see it. Then I glue (with epoxy) the card stock/beadwork combo to the top of the business card holder. I do it similarly with right angle weave, netting, etc. I just use a toothpick to apply the epoxy to the beads, and lay it all down on the card stock. I've worked with epoxy for at least 3 decades, and I'm very used to it. |
||
| Free Instructions for Even Count Peyote (html format) | ||
| Free Instructions for Odd Count Peyote (html format) | ||
| Free Instructions for Tubular peyote (html format) | ||
| Business Card Holder- Blank graph | bscardbl.pdf | flat peyote |
flat peyote free Color Pattern: buscard1.pdf
|
Made by glueing a Czech button in the middle, and then two different shades, and 3 different sizes, of flat back Swarovski rhinestones onto the top of the business card holder. You can use epoxy on the buttons, and Gem-Tac(r) glue, from Beacon, for the rhinestones, available at most craft stores. |
JHB International and other companies also make beautiful metal and glass buttons.
|
|
|
on each product page. |
|
|
|
|
|
|
|
|
|
|
Plastic Body, light weight, Black |
|
|
|
|
|
|
|
|
E-Mail: tbridges@bellsouth.net best price bead pens, lowest price bead pens, lowest price add a bead pens, best price add a bead pens, unique gift, unique beaded gift, unique gifts to bead, beaded gifts, gifts to bead, christmas gifts to bead, lowest price bead letter opener, lowest price add a bead letter openers, lowest price blank letter openers, letter opener blanks. canape, appetizer forks and knives, letter openers for polymer clay, best price polymer clay letter opener, best price polymer clay pen, best price polymer clay supplies, lampworking supplies, polymer clay supplies polymer clay gifts, glass letter openers, glass pens
